See below for the run configuration, which we set up to receive the report statistics from below.
Please refer to the section Experiment Results for more information on the report specific data.
Run configuration
- Stochastic Seed: 12345
- Simulation start date: 1/1/2014 12:00:00 a.m.
- Simulation stop time: 240
- Simulation stop time unit: Hours
Report statistics
- From figure 1 we learn, that the processing time of this model is exactly 8 hours
- Figure 2 shows us that the "Having a break" activity lasts exactly 6 minutes
- These are the values with which we configured the model, so far so good
- But what about the mean value of the "Work" activity
- We set up a constant duration of 1 hour. So why is it not exactly 1 hour?
- Because our worker is having a break 7 times a day, which sums up to 42 minutes a day.
- After he had 7 breaks, he still has 18 minutes to work before the second (attached) event fires and ends the process (see Min-Value from figure 2)
- Just do the math: He works 7 hours and 18 minutes which is 7.3, then divide this by 8 (Observations per day) and multiply it with 60.
- This results in 54.75 minutes, or 54 minutes and 45 seconds
|
Figure 1: The processing times
|
|
Figure 2: The activity details
|
|
Figure 3: The event details
|
- Also note that the gateway always fires the same sequence flow (see figure 4)
|
Figure 4: The gateway details
|